CleanWIPE^®
Wipers

CleanWIPE^® is constructed from an open-cell, ester-based polyurethane medical grade foam and is completely free of fibers. CleanWIPE's^® super fine pore structure and proprietory surface chemistry enable high volumes of disinfectant/cleaners to be evenly applied to clean room surfaces. CleanWIPE^® is laundered with a proprietary process yielding a Class 100 wiper that is ideal for Medical Device and Pharmaceutical applications. Versions are available that are certified as non-cytotoxic. CleanWIPE^® is compatible with EtO, Gamma and autoclave sterilization processes.

	Fiber-Free. Open-cell polyurethane structure allows for fiber-free wiping.
	Improve Disinfection. CleanWIPES® uniform, super fine pore structure evenly apply alcohol, aldehyde, bleach, phenolic and quat-based disinfectants.
	Non-cytotoxic. Available certified non-cytotoxic and lot traceable to comply with FDA standard for the Medical Device industry.
	Chemically compatible. Will not interfere with curing of elastomers, platinum-cured silicones, adhesives and will not deactivate disinfectants.
	Cleaning ease. Sponge-like characteristic allow precise application of cleaning solutions to hard to clean areas such as isolators, conveyors and filling machines.
	Cost effective and environmentally safe. Efficient release of sterile alcohol and disinfectants enable reduced usage without reducing sanitization of aseptic surfaces.
	Available in small sizes. Reduced cost in applications such as catheter wipedown.

UltraSORB® Wiper Out-of-the-Bag	Standard Non-woven Wiper	UltraSORB® Wiper After Use on SMT	Standard Non-woven Wiper

Step 1: Quarter-fold Wiper after wetting with DI Water. For use with IPA, quarter-fold prior to wetting.		Step 2: With all four fingers on top and the thumb on the underside of the Wiper, pull it across the surface of the tool using very light pressure.