cleaning critical surfaces
UltraMOP™ and
UltraMOP™II Heads for
Sterile and Cleanroom Environments |
|
 FS500 |
| Description |
|
|
|
UltraMOP™ and UltraMOP™ II refills are designed for wet mopping procedures in sterile and controlled environments and are constructed from a fine-pore urethane foam to enhance application of disinfectants to clean room surfaces. Available in laminated versions to allow tear-free cleaning and disinfecting of areas that have rough or sharp surfaces. Most mop designs are also available in sterile versions.
UltraMOP™ and UltraMOP™ II are designed for skip free, smooth mopping to enhance cleaning and disinfection. |
 |
FS500 is designed for light duty cleaning and the application of disinfectants. |
|
FS501 (UltraMOP™II) is designed to pick up larger volumes of liquids and to dry surfaces quickly. Constructed of high density foam to resist tearing. |
|
FS505B1 is a Polyester lamination in a patent pending, Bump-PROOF® Wrap-Around design to enhance application of disinfectants to clean room surfaces. |
|
FS506B1 is a Micro-fiber lamination in our exclusive, patent-pending, Bump-PROOF® design making these ideal for drying floors and removal of stubborn contamination. |
|
FS507B1 is a Heavy Duty Polyester lamination in our exclusive, patent-pending, Bump-PROOF® design making these ideal for drying floors and removal of stubborn contamination. |
Polyester fabric Bump-PROOF® Wrap-Around construction eliminates rollover, abrasion related particles and enables a smooth, skip-free motion to enhance disinfectant laydown. |
|
|
|
 |
 |
| Advantages |
|
|
|
FS501 |
FS505-B1 |
|
Proprietary polyurethane foam compatible with disinfectants used for maintaining sterile environments. |
|
Laminated Bump-Proof designs enable tear-free cleaning and disinfecting of areas that have rough or sharp surfaces. |
|
Micro-fiber versions are designed to remove and absorb stubborn contamination such as hardened Biofilms and disinfectant residue. Perfect for drying floors. |
|
Individually packaged to maintain cleanliness. |
|
Fine, uniform pore size and proprietary, patent-pending, lamination techniques ensure excellent laydown and pickup properties. |
|
Available with Lot Certification of Conformance for ease of audit and validation procedures. |
|
Part Numbers |
Description |
Lamination |
|
FS500 |
UltraMOP™ |
None |
|
FS500ST |
UltraMOP™, Sterile |
None |
|
FS501 |
UltraMOP™ II |
None |
|
FS501ST |
UltraMOP™ II, Sterile |
None |
|
FS505B1 |
UltraMOP™ II |
Polyester, Bump-Proof® |
|
FS505B1ST |
UltraMOP™ II, Sterile |
Polyester, Bump-Proof® |
|
FS505B1EN |
UltraMOP™ II |
Polyester, Bump-Proof® |
|
FS505B1ENST |
UltraMOP™ II, Sterile |
Polyester, Bump-Proof® |
|
FS506B1 |
UltraMOP™ II |
Microfiber, Bump-Proof® |
|
FS506B1EN |
UltraMOP™ II |
Microfiber, Bump-Proof® |
|
FS506B1ENST |
UltraMOP™ II, Sterile |
Microfiber, Bump-Proof® |
|
FS507B1 |
UltraMOP™ II |
HD Polyester, Bump-Proof® |
|
FS507B1ST |
UltraMOP™ II, Sterile |
HD Polyester, Bump-Proof® |
|
|
|
|
|
Measurements |
Bag Qty |
Case Qty |
|
0.914" X 5" X 16" |
1/Bag |
50/Cs |
|
|
|
All versions of the UltraMOP™ are Lot certified, individually packed and designed to fit Perfex mop frames 2238 & 2239. Both sponge and sponge/laminated versions are compatible with Gamma, EtO and autoclave sterilization. All mops are Lot traceable back to raw materials. |
|
Exposure Temperature:
|
|
121oC |
|
 |
|
Exposure Time: |
|
30 Minutes |
|
|
Cycle Type: |
|
Gravity |
|
|
Cycle Time: |
|
20 Minutes |
|
|
Pressure: |
|
17.5 psig |
|
|
|
|
|
|
FS505-B1 |
|
|
|
Average |
|
 |
|
Density |
|
1.98 |
|
|
Pore Size |
|
90 |
|
|
Tear Strength |
|
3.5 |
|
|
Tensile Strength |
|
25 |
|
|
|
|
|
|
FS506-B1 |
|
