Home > Documents > Datasheets > UltraMOP Self-Wringing Refills Datasheet

Click Here for Printer Friendly Version


cleaning critical surfaces

UltraMOP™SW
Clean Room Mop Refills

 FS600 UltraMOP 14"
Description
FS600

UltraMOP in duty plastic bag
Protective rubber bumpers and heavy duty plastic bags insure package integrity until ready for use.

UltraMOP™ SW has been designed to clean and disinfect clean rooms and sterile manufacturing environments. It is a self-wringing mop head refill constructed of a super, fine-pore urethane foam mechanically affixed to either a stainless steel or galvanized runner and designed

to enhance application of disinfectant to clean room surfaces. The mop refills are constructed from a high strength foam to resist abrasion-related particle generation. UltraMOP™SW mop heads are ideal for users who need one style of mopping system in clean rooms. Compatible with Gamma, EtO and steam sterilization processes. The UltraMOP™SW mop head refills are designed to fit on Roll-O-Matic® mop handles.

 
Advantages
Foamtec Improved disinfection. A fine-pore foam with uniform pore size enhances application of disinfectant solutions to clean room surfaces.
Foamtec Improved cleaning effectiveness. Pin-hole-free foam with excellent cross linking offers better abrasion resistance to reduce foam crumbling.
Foamtec Improved cleanliness. High strength bag and patent-pending protection of 90o eyelets ensure rip-free bags.
Foamtec Fully certified and lot traceable. Each mop is Lot# identified, fully traceable with Lot certifications.



FS600 UltraMOP End View FS600 - UltraMOP Package Integrity View
FS600
Protective rubber bumpers insure package integrity. MUST BE REMOVED BEFORE AUTOCLAVING.
Part Numbers

bullet FS600 / FS620 are 14" and 10", respectively, self-wringing, sponge mop heads with stainless steel bracket designed for light duty cleaning and the application of disinfectants.
   
bullet FS600 available in sterile and non-sterile versions.
   
bullet FS601 / FS621 are 14" and 10", respectively, self-wringing, sponge mop heads with galvanized bracket designed for light duty cleaning and the application of disinfectants.

Packaging:
FS600 and FS601 - 1/Bag, 12 or 50 Bags/Case
FS620 and FS621 - 1/Bag, 12 Bags/Case
All versions of the UltraMOP™ are Lot certified, individually packed and designed to fit Roll-O-Matic® mop frames. UltraMOPS™ are compatible with Gamma, EtO and autoclave sterilization. All mops are Lot traceable back to raw materials.

Recommended Autoclave Settings
Physical Properties
Exposure Temperature:
121oC
Average
Exposure Time:
30 Minutes
Density
2.09
Cycle Type:
Gravity
Pore Size
73
Cycle Time:
20 Minutes
Tear Strength
3.38
Pressure:
17.5 psig
Tensile Strength
23

Roll-O-Matic® is a registered trademark of Freudenberg Household Products LP.