Screen Printed Electronics
FWCC's innovative foam and micro fiber wiping products are used in many fine line printing operations to remove ink, paste and epoxy from mesh masks, screens and stencils. In advanced screen printing processes the wiper is often the limiting factor as traditional polyester and non-woven wipers generate fibers from routing screen and stencil cleaning. UltraSORB® and FirmWIPE® foam wipers are constructed from super abrasion resistant polyurethanes so fiber contamination on the screen and stencil can finally be designed out of the screen printing process.
We back our products with production proven cleaning methods that enable the following benefits:
- Eliminate wiper related fiber defects
- Reduce the cost of cleaning large screens in the Flex Circuit/PCB and Plasma Display applications
- Reduce the cost of thoroughly cleaning ink from screens and stencils
- Eliminate the fibers associated with non-woven under-stencil roll wipers in ultra fine pitch SMT and epoxy printing operations.
Thick Film Screen Cleaning - Find out how to remove excess paste with Zero fiber contamination.
SMT Stencil Cleaning - Find out how to improve the quality of fine mil Stencil Printing.
Conductive Ink - Find out how to face those daunting cleaning challenges.