Select Page

Conquering Sticky and Slippery Cleanroom Floors: Unveiling the Efficacy of the Sahara+ PharmaMOP GO Mop

by | May 25, 2023

Introduction: Cleanroom environments are critical in industries such as pharmaceuticals, biotechnology, electronics, and healthcare, where strict hygiene standards are imperative. However, cleanroom floors can become sticky or slippery even after thorough cleaning and disinfection, posing potential risks to personnel, product quality, and overall cleanliness. Foamtec’s innovative solution, the Sahara+ PharmaMOP GO Mop, offers a reliable and effective way to address these challenges. This blog will explore how this advanced mop system tackles the root causes of sticky and slippery cleanroom floors.

  1. Residue from cleaning agents: One of the primary causes of sticky or slippery cleanroom floors is the residue left behind by cleaning agents. Traditional mops may only effectively remove some traces of cleaning solutions, leading to unwanted residue accumulation. However, the Sahara+ PharmaMOP GO Mop incorporates Foamtec’s proprietary Sahara foam laminated to a super absorbent microfiber fabric and an absorbent foam core. This combination ensures simultaneous scrubbing and superior liquid retention and release, allowing for thorough cleaning and minimizing residue buildup. The mop’s dense, non-shedding foam material traps contaminants, preventing them from redepositing onto the cleanroom floor.
  • Improper dilution: Improper dilution of cleaning agents can result in applying a concentrated solution, leaving behind a sticky or slippery residue. The Sahara+ PharmaMOP GO Mop is a production proven to clean up high sodium hypochlorite-based sporicides concentrations.
  • Inadequate rinsing: Thorough rinsing is crucial after disinfection to remove any residual disinfectant from the cleanroom floor. Failure to rinse adequately can lead to the accumulation of disinfectant residue, resulting in a sticky or slippery surface. The Sahara+ PharmaMOP GO Mop combats this problem through its efficient liquid absorption capabilities. The foam material rapidly absorbs excess liquid, facilitating quick and efficient rinsing. This feature minimizes the risk of residue buildup, promoting clean and safe floors within the cleanroom environment. Moreover, the simultaneous scrubbing and application of fresh disinfectants minimize residue buildup, making rinsing much more robust.
  • Incompatibility between cleaning agents and disinfectants: Certain cleaning agents and disinfectants may not be compatible, leading to sticky or slippery residues forming. Foamtec recognizes this challenge and ensures the Sahara+ PharmaMOP GO Mop is designed to work seamlessly with a wide range of cleaning agents and disinfectants commonly used in cleanroom environments. This compatibility mitigates the risk of residue formation and promotes optimal cleaning and disinfection outcomes.

Conclusion: Maintaining clean and hazard-free cleanroom floors is essential for the integrity of sensitive industries. Sticky or slippery floors can compromise safety, product quality, and cleanliness. Foamtec’s Sahara+ PharmaMOP GO Mop offers a reliable solution to address these challenges. With its advanced foam technology, customizable liquid delivery system, and efficient liquid absorption capabilities, this innovative mop system effectively tackles the root causes of sticky and slippery cleanroom floors. By utilizing the Sahara+ PharmaMOP GO Mop, cleanroom operators can ensure their facilities’ highest cleanliness, safety, and productivity standards.

Learn more about Foamtec’s PharmaMOP GO System:

https://www.foamtecintlwcc.com/products/cleanroom-mops/flat-mop-systems/pharmamop-go