Select Page

Sterile PharmaMOP®

The Ultra-lightweight Cleanroom Mop

PharmaMOP® is designed for cleanroom cleaning SOP’s. The light weight, 360 degree rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle , wringer less bucket system and drip resistant mop heads allow operators to efficiently carry out SOP’s with improved ergonomics. PharmaMOP® can be used with figure eight, front to back or top to bottom motions and the rotating mop frame enable cleaning of tight spaces. The PharmaMOP® handle and SingleSTEP™ mop heads have been designed to allow for greatly improved cleaning efficiency of soils and residues from difficult to clean textured floors while at the same time allowing ease of mopping. The entire PharmaMOP® system is compatible with steam sterilization and all of the major disinfectants.

PharmaMOP® mop heads are constructed with a foam core sandwiched between two layers of cleanroom fabric. The fabric is ultrasonically welded around the perimeter to guard against fiber contamination. PharmaMOP® mop heads are produced on a fully automated production line in an FDA licensed ISO class 8 clean room and are designed to meet cleaning and disinfection SOP’s in cGMP facilities. Compatible with bleach, peracitic acid, phenolics, Quat and IPA based disinfectants and sanitizers. PharmaMOP® mop heads are availiable gamma iradiated with a Sterility Assurance Level(SAL) 10-6 for use in aseptic processing areas. All mopheads are individually packed and double bagged to ensure compliance with cleanroom procedures.

PharmaMOP® Handle Advantages

R

360° Swivel.

A two direction 360° swivel and mop head with a 1.5″ low profile design enables unsurpassed access to tight spaces reducing uncleanable dead spots.
R

All Surface Design.

An all surface, large area design, compatible with pull and figure eight motions, simplify SOPs and reduce costs by eliminating the need for multiple mop types.
R

Improved Ergonomics.

An ultra-lightweight telescoping handle and extensions reduce operator fatigue and cleaning time for high spaces.
R

No Wringer Required.

Designed to work without complex wringers that are prone to rust.

PharmaMOP® Mop Head Advantages

R

Drip Resistant. Wringerless Design.

PharmaMOP® mop heads are designed so operators can adjust saturation levels without a mechanical wringer.
R

Ease of Use.

PharmaMOP® mop heads enable operators to meet disinfectant contact times without suffering dripping and weight penalties so typical with clean room mops.
R

Available Gamma Irradiated.

Certified 10-6 Sterility Assurance Level(SAL) in a ISO 9001:2000 & 13485:2003 certified facility for use in aseptic processing areas.
R

Robust Cleaning and Disinfection.

PharmaMOP® mop heads are available with a unique hybrid microfiber fabric which enable robust removal of soils while simultaneously meeting disinfectant contact time specifications required by cGMP cleaning and disinfection SOP’s.

Sterile PharmaMOP® Catalog

Filters Sort results
Reset Apply
Product
Description
Quantity
Details

Sterile Cleanroom Flat Mop Head for Deep Cleaning

PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms..


Size: .25" x 5" x 16.5"

Sterile Cleanroom Flat Mop Head

Sterile PharmaMOP® Head for application of standard volumes of disinfectant cleaners to ceilings, walls and floors. Polyester over foam construction provide abrasion free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to Sterility Assurance Level(SAL) 10-6.


Size: .25" x 5" x 16.5"
Packs/Case:
1/Bag
10bgs/Pk
10PK/Case

Sterile Cleanroom Flat Mop Head for Removing High Volume of Sticky Residues

Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to Sterility Assurance Level(SAL) 10-6.


Size: .50" x 6.5" x 16.5"
Packs/Case:
1/Bag
10bgs/Pk
10PK/Case

Sterile Cleanroom Flat Mop Head for High Volume Disinfectant Laydown

Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to Sterility Assurance Level(SAL) 10-6.


Size: .50" x 6.5" x 16.5"
Packs/Case:
1/Bag
10bgs/Pk
10PK/Case

Sterile Cleanroom Microfiber Mop Head for Removal of Heavy Residues

Sterile PharmaMOP® Head constructed with cleanroom micro fiber fabric over foam for removing heavy residues from aseptic processing areas. Ideal for SOPs designed to remove bleach and sporicide residues. Gamma irradiated to Sterility Assurance Level(SAL) 10-6.


Size: .50" x 5.5" x 16.5"
Packs/Case:
1/Bag
40PK/Case
5bgs/Pk

100PPI Foam Mop Head with Microfiber Lamination, Ribbed with Sahara™ Foam, Sterile


Sterile Cleanroom Microfiber/Polyester Mop Head

Sterile Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors. Gamma irradiated to Sterility Assurance Level(SAL) 10-6.


Size: .25" x 5" x 16"
Packs/Case:
1/Bag
10PK/Case
5bgs/Pk

About Foamtec WCC

Foamtec's mission is to enable contamination control professionals to improve particle control in clean rooms by solving surface contamination challenges. The Wilshire Contamination Control Division of Foamtec International supplies clean room mops, foam swabs, microfiber swabs, foam wipers, microfiber wipers, UltraSOLV® ScrubPADS to address clean room cleaning and the critical cleaning of process equipment.

 

Contact Us

Address

6575 IH-35 North
Waco, TX 76705