MiraSAT™ 10/90 is pre-saturated with 10% Semiconductor Grade IPA & 90% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber requires only 7ml of solution to be uniformly dampened which enables scrubbing like cleaning action to dislodge, entrap and remove contaminants while reducing IPA consumption by 20-50%*. MiraSAT’s super strong weave and sealed edge minimize shedding of fibers even on textured surfaces making it ideal for equipment cleaning tasks. MiraSAT™ is manufactured and processed in an ISO 5 cleanroom. Each pack contains 20 MiraSAT™ wipers and is double bagged to aid cleanroom entry protocols.
Combined with the UltraSOLV® ScrubPAD and Sponge, MiraSAT’s capabilities to dislodge, entrap and remove stubbornly adhered contamination reduces wiper usage, hazardous waste and equipment recovery time.
• For use in ISO Class 3 and higher cleanrooms.
• Cleaning of hi-vac process chambers and robotics in flat panel display and wafer fabs.
• Cleaning VOC sensitive process equipment in lithography, CVD and metrology modules.
• Cleaning baked-on resist and developer from lithography tracks.
• Final wipedown of sensitive components such as EFEM’s, electrostatic chucks, VAT valves and gas dispersion plates.
• Equipment PM’s and wet cleans where the elimination of VOC’s and flammable solvents are required.
• Ideal for cleaning wafer handling systems to eliminate linear scratch defect events.
• Significantly reduces VOC’s for sensitive fab modules such as lithography, metrology and CVD.
• Unsurpassed abrasion & snag resistance minimizes scratch defects and particle excursions associated with fab wipers.
• For equipment PM’s, the lightly dampened, woven microfiber fabric is production proven to improve equipment uptime and first pass qual rates.
• Foamtec’s state of the art ISO 5 processing facilities produces a wiper optimized for use in the most advanced wafer fabs.
• Eliminates contamination risks associated with soiled IPA squirt bottles.
Implementing MiraSAT™ helps wafer fabs to remain within their air permit limits while making a step change improvement in environmental compliance and cost avoidance.
• Reduce flammable chemical storage, solvent squirt bottles, and handling of IPA in the cleanroom.
• Reduce fugitive VOC emissions and air permit implications associated with solvent wiping.
• Reduce personnel exposure to isopropyl alcohol during cleanroom wipe downs.
MiraSAT™ UPW is pre-saturated with 100% Ultrapure Water(UPW), 144mL. Designed for ISO 3-5 Cleanrooms.
MiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW), 144mL. Designed for ISO 3-5 Cleanrooms.
MiraSAT™ 70/30 H is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW), 190mL. Designed for ISO 3-5 Cleanrooms.
MiraSAT™ SM 70/30 H is pre-saturated with 70% USP IPA & 30% Ultrapure Water(UPW), 190mL. Designed for ISO 5-8 Cleanrooms.