Select Page

Reducing Post-PM Particle Adders on ASM Epi Tools: The HT1515FC MiraSWAB for Slit Valve and Exhaust Slot Cleaning

Equipment engineers maintaining ASM epitaxial reactors know the frustration all too well. You’ve completed a thorough preventive maintenance (PM), followed every SOP, and yet particle adders spike during the first wafers after recovery. Qualification runs drag on, tool uptime suffers, and yields take a hit—all while the root cause often hides in the hardest-to-reach areas.

Slit valves, chamber throats, and transfer interfaces are notorious particle generators. These recessed geometries trap deposits, fibers, and process residues that standard cleaning tools simply can’t reach effectively. Traditional swabs are too short or rigid, and wrapped wipes lack the precision and conformability needed for deep cleaning.

Precision Cleaning for ASM Epi Tools

Foamtec has developed the HT1515FC MiraSWAB specifically to solve this challenge on ASM epi tools.

  • 13.5-inch length reaches deep into slit valve pass-throughs and exhaust slots.
  • Marshmallow-shaped tip (22 mm on each side × 34 mm long) is engineered to fit precisely into the geometry of ASM slit valves and chamber exhaust areas.
  • When the triangle part/ISO valve is removed, the extended tip accesses the deep slot on the chamber side for thorough cleaning.

The MiraSWAB combines MiraWIPE® microfiber over a highly conformable foam core. This hybrid construction delivers superior particle entrapment and removal compared to traditional swabs or wrapped wipes. The microfiber gently lifts and captures residues without generating new fibers or scratches, while the foam core provides the right amount of compression and rebound to scrub recessed surfaces effectively.

Proven Impact on Tool Recovery

Post-PM particles frequently originate from exactly these locations—slit valves and exhaust slots—where deposits accumulate and then dislodge during wafer transfers. Engineers using the HT1515FC report faster particle recovery, fewer repeat qualifications, and reduced contamination-related downtime.

By implementing more effective slit valve and chamber exhaust cleaning as part of your PM routine, you can:

  • Lower post-PM particle adders
  • Shorten qualification times
  • Improve overall tool availability and process stability

Ready to Improve Your ASM Epi Tool Performance?

If you’re an equipment engineer responsible for ASM epi tools and you’re still fighting high particle counts after PMs, the HT1515FC MiraSWAB may be the missing piece in your contamination control strategy.